![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Free4NAS. Сетевое хранилище
NAS4Free is an Open Source Storage NAS (Network-Attached Storage) distribution based on FreeBSD
NAS4Free supports sharing across Windows, Apple, and UNIX-like systems. It includes ZFS v5000 , Software RAID (0,1,5), disk encryption, S.M.A.R.T / email reports etc. with the following protocols: CIFS/SMB (Samba), Active Directory Domain Controller (Samba), FTP, NFS, TFTP, AFP, RSYNC, Unison, iSCSI (initiator and target), HAST, CARP, Bridge, UPnP, and Bittorent which is all highly configurable by its WEB interface. NAS4Free can be installed on Compact Flash/USB/SSD key, Hard disk or booted from a LiveCD/LiveUSB with a small usbkey for config storage.
http://sourceforge.net/projects/nas4free/files/NAS4Free-10.2.0.2/10.2.0.2.2118/NAS4Free-x64-LiveCD-10.2.0.2.2118.iso/download
Requirements
============
Embedded: 2GB CF/USB/SSD
Full: 4GB HDD/SSD
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).
NAS4Free Setup and User Guide
http://www.zoonsweb.nl/wiki/doku.php?id=documentation:setup_and_user_guide
Special note for ZFS kernel parameter tuning
============================================
Now, the extension package is separated and released.
If you have a question, please visit our forum.
ZFS kernel tune (WebGUI extension) 20121031
httpforums.nas4free.orgviewtopic.phpf=71&t=1278
Extensions and ownCloud sample
==============================
You can install some PHP based packages easily.
If you are interested, please refer to following thread.
Using ownCloud on NAS4Free + Active Directory Authentication
httpforums.nas4free.orgviewtopic.phpf=48&t=1606
NAS4Free 10.2.0.2.xxxx are current stable versions and
used as base version for all future releases!
Note for new users:
===================
**** The default login for NAS4Free WEBGUI ****
username: admin
password: nas4free
**** phpVitualBox's default login ****
username: admin
password: admin
- Change those default passwords after setup!
NAS4Free is an Open Source Storage NAS (Network-Attached Storage) distribution based on FreeBSDNAS4Free supports sharing across Windows, Apple, and UNIX-like systems. It includes ZFS v5000 , Software RAID (0,1,5), disk encryption, S.M.A.R.T / email reports etc. with the following protocols: CIFS/SMB (Samba), Active Directory Domain Controller (Samba), FTP, NFS, TFTP, AFP, RSYNC, Unison, iSCSI (initiator and target), HAST, CARP, Bridge, UPnP, and Bittorent which is all highly configurable by its WEB interface. NAS4Free can be installed on Compact Flash/USB/SSD key, Hard disk or booted from a LiveCD/LiveUSB with a small usbkey for config storage.
http://sourceforge.net/projects/nas4free/files/NAS4Free-10.2.0.2/10.2.0.2.2118/NAS4Free-x64-LiveCD-10.2.0.2.2118.iso/download
Requirements
============
Embedded: 2GB CF/USB/SSD
Full: 4GB HDD/SSD
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).
NAS4Free Setup and User Guide
http://www.zoonsweb.nl/wiki/doku.php?id=documentation:setup_and_user_guide
Special note for ZFS kernel parameter tuning
============================================
Now, the extension package is separated and released.
If you have a question, please visit our forum.
ZFS kernel tune (WebGUI extension) 20121031
httpforums.nas4free.orgviewtopic.phpf=71&t=1278
Extensions and ownCloud sample
==============================
You can install some PHP based packages easily.
If you are interested, please refer to following thread.
Using ownCloud on NAS4Free + Active Directory Authentication
httpforums.nas4free.orgviewtopic.phpf=48&t=1606
NAS4Free 10.2.0.2.xxxx are current stable versions and
used as base version for all future releases!
Note for new users:
===================
**** The default login for NAS4Free WEBGUI ****
username: admin
password: nas4free
**** phpVitualBox's default login ****
username: admin
password: admin
- Change those default passwords after setup!
